Our top products

MDF construction kit for a MODULE BOX with FRONT GLASS PANEL

Dimensions (WxDxH):
Inside:    50 x 28 x 30  cm
Outside:  53 x 30 x 34 cm

Our MODULE BOX is exactly the right choice for anyone wanting to start with one or two rooms and later expand them into a house. The module boxes can be easily placed on top of each other and fastened on the back with two screws.

An attic floor (90110) or our new Top floor (90140) with a large studio window completes the whole.

Bulky goods surcharge:
The shipping within Germany and Austria is without bulky surcharge. For all other European countries, we charge a bulky goods surcharge in the amount of € 30.00 incl. VAT.

Due to the size and weight of the MDF construction kit we sell the kit only within Europe.

 

Dimensions:
Width 115 cm x height 107 cm x depth 38 cm

Scope of supply:

Set of building components (# 90220):
The matching components (7 windows, 10 doors and a staircase) are included in the set of building components (# 90220), but they are NOT included in this MDF construction kit.

The pictures are showing exemplary furnishings and accessories:
The full-length balcony is part of the Villa Tara's MDF panel kit, which can be attached as an option. The balcony railing (#70321), the balcony corner pillars (#70300) and the white roof gable with the "Mini Mundus crown" (special design) are not included in the scope of delivery.

Shipping weight and dimensions:
120 x 42 x 16 cm (WxHxD) 
weight: 31.5 kg

Bulky goods surcharge:
Shipping within Germany is without bulky surcharge.

For all other European countries, we charge a bulky goods surcharge in the amount of € 30.00 incl. VAT.

Due to the size and weight of the MDF construction kit we sell the kit only within Europe.

6-piece

Polished brass, partially gilded.

Dimensions of the two glass shelves:

13 x 50 mm and 13 x 78 mm

Our LED battery Minis are really something special, made from brass, which are equipped with LEDs that light up with a warm white light, similar to the light from a light bulb.

The battery and a small switch are located at the base of the lamp.

The MinLux LED battery minis are ideal for the module boxes, as there is no need for cabling and the cost of purchasing a transformer.

The scope of delivery includes an adhesive pad and a 3 V lithium battery (button cell) of type CR 927, which you can reorder as a replacement under item no. 26310.

Dimensions:
Height 120 mm, Ø 35mm

Natural wood construction kit includes:
14 steps, 3 end posts, 13 spindles, 3 post pieces, 2 brass rods for the center post and eyelet pins and cords for the handrail.

Dimensions:
The staircase is designed for a ceiling height of 280 mm.

Required area: 120 x 65 mm
Ceiling cut-out 80 x 65 mm

Connected loads:
12 Volt= / 2 A, (230 V~ primary), suitable for a max. of 30 incandescent lamps.

The transformer is plugged directly into the socket and has a 90 cm long 2-core cable with luster terminal at the 12V output for connection to the distribution plate (# 22300) or to our socket strips.

You can use the 2-wire cable (# 22200) to extend the 90 cm long connection cable.

Dimensions:
10 x 7 x 6 cm (HxWxD)

Natural wood construction kit.

Dimensions:
7 x 12 x 4 cm (HxWxD)

500 piece set
Fish scale shape

Size of one wooden shingle:
19 mm x 32 mm x 2 mm

Area coverage:
25 x 20 shingles = 47.5 x 38 cm = 0.18 m²

Dimensions:
8 x 4 x 4 cm (HxWxD)

Hint:

The second image shows another design example. (Photo by @cheries_mini)

House dimensions:

For the exact internal dimensions of all the rooms, including the room heights in the various levels, please see the image with the detailed dimensions.

Scope of supply:
The construction kit (90350) includes - all - of the wood sections for the walls and floor made from MDF material (Medium Density Fiber panels) which you need to build the "Large townhouse" with folding roof. The MDF panel construction kit includes - EVERYTHING - it's ready-to-go and the milled-in grooves for all of the walls and cable ducts allow even the inexperienced to build the house without tools.

The MDF construction kit does not include the windows, doors and stairs shown, which are all part of the building element set (# 90320), nor the lamps and wallpapers.

Small and intricate details:
The matching components (windows, doors and a staircases) are included in the set of building components (#90320), but they are NOT included in this MDF construction kit. The roof can optionally be equipped with 4 dormers (50370 / 50371) as shown in the picture.
 

exquisite perfume flacons, 5 pieces

made by hand

plastic, with gold-plated brass decorations,

different colors: green, pink, light blue, dark red and cognac

Dimensions:
10 mm high each, Ø 8 mm.

Safety transformer,
manufactured in Germany, in accordance with DIN EN61558-2-6.
For use in dry rooms only.
Transformer is completely moulded into the plastic housing.
Protected on the input side by a current-sensitive temperature switch 110°C, with self-holding function (combined protection against overtemperature and overcurrent).

Connected loads:
Primary: 230 V~, 50/60 Hz
Secondary: 12 V~ / 8.9 A
Power: 105 VA, with overtemperature switch

Connection:
Input:
Flat cable 2x 0.75mm², 1.40 m long, with Euro flat plug.
Output:
Round cable 2x 1.5mm², white, 0.5 m long, ends stripped.

Dimensions (WxHxD):
108 x 74 x 77 mm
Weight: 2.6 kg

Note:
The transformer is suitable for max. 140 light bulbs or 14 soffit strips (indirect lighting # 20600 = 2 soffit strips / pack).

If the transformer overheats (overloads), the built-in thermal switch briefly switches the transformer off to protect the system.

IMPORTANT: The temperature switch does NOT reset itself after a fault. This is for safety reasons to prevent unintentional restarting. To reset the built-in temperature switch, the transformer must be completely disconnected from the power supply for a few minutes.

Self-adhesive aluminium mosaic, brushed.

Colouring:
Using a quick-drying synthetic resin paint from a spray can (e.g. car paint), the tiles can be easily painted in any desired color - without sealing the grout joints with the paint.

Dimensions:

item.-no. 81100:  29.0 x 29.0 cm, 27 x 27 tiles

item.-no. 81110:  19.3 x 29.0 cm, 18 x 27 tiles

item.-no. 81120:  19.3 x 9.6 cm, 18 x 9 tiles

item.-no. 81130:    9.6 x 9.6 cm, 9 x 9 tiles

Tile:  10 x 10 x 3.5 mm

The surfaces of our mosaic tiles are made of aluminium in an elaborate process and applied with high precision to a self-adhesive backing material.

Grouting:
Grouting of the joints, which are only 0.75 mm wide, is not necessary. However, if you prefer a coloured grout, make sure that you use a grout for glass or metal tiles that is made without quartz sand, as this can otherwise damage the lacquered surface. You can find suitable products in DIY stores.

Frieze for wall tiles:
For the borders above the tiled surface, there are five different patterns (81000) on glossy cardboard from which you can cut out the matching border.

Tile patterns:
Simply cut out individual tiles from the tile sheet with a sharp carpet knife - before gluing the tiles - and replace them - after gluing the tile sheet - with tiles that have been painted in colour in advance, so you can create the most beautiful creations. The small arch with tiles (# 81130) is ideal for this, as it is easier to paint the tiles on the sheet than individual tiles.

You will find more detailed tips in the following product description (click on "Learn more") and in the accompanying leaflet for the tiles.

The small antiquarian books (19365 | 19370| 19375) are not included in the scope of supply.

Modification:

The second picture shows another design example. The piece is painted antique nickel and then heavily distressed (shabby look). For the back wall of the shelf, a striped wallpaper was used and the feet were replaced by slightly higher ones. (Photo by dollhouse_smithery)

Intricate hand-made - sitting - porcelain dolls bring every scene to life. The arms can be moved to any desired position.

The clothing was hand-tailored from exquisite fabrics with especially fine patterns and "custom-made" for every single figurine.

Total hight: 13.5 cm

• A plastic keyboard reproduced from the original.
• the fabric for the upholstered stool.

Self-adhesive aluminium mosaic, brushed

Colouring:
Using a quick-drying synthetic resin paint from a spray can (e.g. car paint), the tiles can be easily painted in any desired color - without sealing the grout joints with the paint.

Dimensions:

item.-no. 81100:  29.0 x 29.0 cm, 27 x 27 tiles

item.-no. 81110:  19.3 x 29.0 cm, 18 x 27 tiles

item.-no. 81120:  19.3 x 9.6 cm, 18 x 9 tiles

item.-no. 81130:    9.6 x 9.6 cm, 9 x 9 tiles

Tile:  10 x 10 x 3.5 mm

The surfaces of our mosaic tiles are made of aluminium in an elaborate process and applied with high precision to a self-adhesive backing material.

Grouting:
Grouting of the joints, which are only 0.75 mm wide, is not necessary. However, if you prefer a coloured grout, make sure that you use a grout for glass or metal tiles that is made without quartz sand, as this can otherwise damage the lacquered surface. You can find suitable products in DIY stores.

Frieze for wall tiles:
For the borders above the tiled surface, there are five different patterns (81000) on glossy cardboard from which you can cut out the matching border.

Tile patterns:
Simply cut out individual tiles from the tile sheet with a sharp carpet knife - before gluing the tiles - and replace them - after gluing the tile sheet - with tiles that have been painted in colour in advance, so you can create the most beautiful creations. The small arch with tiles (# 81130) is ideal for this, as it is easier to paint the tiles on the sheet than individual tiles.

You will find more detailed tips in the following product description (click on "Learn more") and in the accompanying leaflet for the tiles.

The "Vario concept":

The closet has 2 doors and 4 drawers.

Natural wood construction kit

Dimensions:
16 x 10 x 5 cm (HxWxD)

Modification:

The other pictures show more design examples.

In the second picture, light green chalk paint was used, which was wiped off in some places after painting to create a 'shabby chic look'. To modify the cupboard doors, you can saw out the window cut-outs from the two doors (part 7 of the kit) with a fretsaw or build the door frame yourself using four small strips. Fabric 50941 was used for the cut-outs. The white knobs come from a round wooden stick where small pieces were cut off and painted white. (Photo by @wildwood_miniatures)

In Picture 3 and 4, the lower and upper parts of the cabinet were built up individually and painted in the colour 'antique nickel'. Subsequently, the pieces of furniture were sanded till suitably aged. The fittings were darkened. (Photo by @dollhouse_smithery)

Tray with a bottle (whisky) and 4 tumblers.

Brass, tray additionally chased.

Dimensions:
Tray Ø 38 mm,
height of the bottle 28 mm

Natural wood construction kit, including stair railing.

Dimensions:

The staircase is designed for a ceiling height of 250 mm.
Required area: 66 x 200 mm

The stair railing can be mounted right or left.